EL 3 | Simple Set-Up with Low Cost | Multi Control Liquid Switches

EL 3 | Simple Set-Up with Low Cost | Multi Control Liquid Switches

Share:


EL 3 | Simple Set-Up with Low Cost | Multi Control Liquid Switches



Specifications

Process Temperature:
-50 ... 130 °C

Process Pressure:
-1 ... 63 bar

Version:
- with 2 rod electrodes
- with 3 rod electrodes
- with 4 rod electrodes
- with 5 rod electrodes

Materials, wetted parts:
- PTFE
- 316Ti (1.4571)
- Alloy C4 (2.4610)

Threaded connection:
G1-1/2

Housing material:
Stainless steel (precision casting)

Protection rating:
IP66/IP67

Output:
For connection to a controller

Ambient temperature:
-40 ... 80 °C

Approvals:
- ATEX / Europe
- EAC (GOST) / Belarus

Explosion Protection:
Intrinsic safety "i"

Overfill protection:
WHG


Conductive multiple rod electrode

Rod electrodes with PTFE insulation

Application area

With 2 to 5 rods, a corresponding number of switching points between 5 cm and 6 m can be realized. Extended temperature range through PTFE insulation. A VEGATOR 130 series controller is required for operation.

The multiple rod electrode EL 3 is a universal level switch for conductive liquids. The instrument is ideal as overfill and dry run protection or pump control in conjunction with VEGATOR 132 controllers.

 

Your benefit

  • Simple setup with minimum time and cost expenditure
  • High flexibility through shortenable probe
  • Maintenance-free through robust design
 


 Inquiry - EL 3 | Simple Set-Up with Low Cost | Multi Control Liquid Switches

Fill out the form below and we'll be in touch soon.