VEGACAL 66 - LEVEL SENSOR for Use in Conductive Liquids and Bulk Solids

VEGACAL 66 - LEVEL SENSOR for Use in Conductive Liquids and Bulk Solids

Share:


VEGACAL 66 - LEVEL SENSOR for Use in Conductive Liquids and Bulk Solids



Capacitive cable probe for continuous level measurement

Cable probe, fully PTFE insulated

Application area

For use in non-abrasive liquids and bulk solids. The cable probe is fully insulated. A full/empty adjustment is necessary for setup.

The VEGACAL 66 is a level sensor for use in non-abrasive liquids and bulk solids. The cable probe is fully insulated. The proven mechanical construction offers high functional safety.

 

Your benefit

  • Savings through simple mounting and setup
  • Long lifetime and low maintenance requirement through robust mechanical construction
  • Maximum utilization of the vessel because measurement over the complete probe length
 
Technical Specifications
Measuring range - Distance  32m
Process temperature  -50 ... 150 °C
Process pressure  -1 ... 40 bar
Version
  • PTFE insulated cable ø 8 mm with gravity weight
  • PTFE-insulated cable ø 8 mm with gravity weight and screening tube
Threaded connection  ≥ G1, ≥ 1 NPT
Flange connection  ≥ DN50, ≥ 2''
Housing material
  • Plastic
  • Aluminium
  • Stainless steel (precision casting)
  • Stainless steel (electropolished)
Output Profibus PA, Foundation Fieldbus, 4 … 20 mA/HART - two-wire
Approvals ATEX, CSA, FM, EAC (GOST), IEC, KOSHA, NEPSI, UKR Sepro, INMETRO, Explosion protection, Ship, Overfill protection, SIL2

Refer to the link for more details: https://www.vega.com/en/home_de/products/product-catalog/level/capacitive/vegacal-66



 Inquiry - VEGACAL 66 - LEVEL SENSOR for Use in Conductive Liquids and Bulk Solids