Ultrasonic Meter with BTU Measurement (ALSONIC-EG)

Ultrasonic Meter with BTU Measurement (ALSONIC-EG)


Ultrasonic Meter with BTU Measurement (ALSONIC-EG)


1-48" (25-1200 mm)

1% - 2%

-22~+230 °F (-30 ~ +110C)

Water, clean liquids , chillers, HVAC, heat exchangers

Permanent-install clamp-on

Clean liquids ≤1-2% bubbles/particles

Single channel, MODBUS, analog outputs, 16G SD data logger, batch control

SmartMeasurement’s ALSONIC-EG energy meters employ the proven transit-time ultrasonic flow measurement technique combined with two PT 100 temperature sensors (or customer-supplied RTD sensors) for calculating total and instantaneous energy consumption. Flow measurement may be achieved via clamp-on, spool piece, or insertion-type sensors. Our microprocessor based, user friendly field programmable flow measurement technique creates no interruption of the process flow and allows for easy installation.

The ALSONIC-EG is available with a variety of features that make it adaptable to many different applications. Available transducer types include clamp-on, in-line, and insertion. Wall-mount, panel-mount , pipe-mounted and compact din-rail mounted display types are also offered. Additional available features include pulse, 0-20 mA & 4-20 mA outputs, RS-232 communication, user-selectable engineering units, and a data logger function. This variety of features, combined with its low cost, make the ALSONIC-EG an ideal choice for economical BTU monitoring in many applications involving chillers, radiators, and heat exchangers.

  • Permanent-install clamp-on
  • Clean liquids ≤1-2% bubbles/particles
  • Sizes 1-48" (25-1200 mm)
  • -22~+230 °F (-30 ~ +110C)
  • 1% - 2%
  • Clamp (strap)-on flow and temperature transducers
  • Single channel, MODBUS, analog outputs, 16G SD data logger, batch control
  • Water, clean liquids , chillers, HVAC, heat exchangers
  • Measures energy consumption rate and total
  • Compact or wall mount version
  • Proven ultrasonic technology for flow measurement and reliable PT 100 RTDs for temperature measurement
  • Clamp-on, spool piece or insertion mounting for flow measurement
  • Wide range of fluid velocities – 0.03 ~ ± 105 feet/sec.
  • Transducers for pipe sizes ranging from ½” to 240″ (13 to 6000 mm)
  • High accuracy – ±0.5% of reading
  • RS485 and Modbus communication protocols available
  • 4-20 mA and pulse outputs with available relays and alarms
  • Data logger function – includes time & date, totalizer, diagnostics
  • Fast response time – less than 1 second
  • NIST traceable calibration certificate
Measuring Principle: Transit time differential
Transducer Type: Clamp-on, spool piece, or insertion
Pipe Size: ½”-240″ (25-6000mm)
Pipe Material: Cast Iron, Stainless Steel, Ductile Iron, Copper, PVC, Aluminum, Asbestos Fiberglass, ect.
Temperature measurement: PT 100 RTDs
Liner Material: Tar Epoxy, Rubber, Mortar, Polypropylene, Polystrayl, Polystyrene, Polyester, Ebonite, Polyethylene, Teflon, ect.
Accuracy: ± 1% ~ ± 2% of reading (1.5 ~ 100 feet/sec.)± 0.5% of reading (online calibration)
Repeatability: ± 0.5% of reading
Engineering Units: Metric or English (US)
Liquid Temperature: -40 ~ 312°F (-40 ~ 155°C)
Display: LCD with backlight, 2 x 20 characters 1-line, non-backlit 7 digit LCD (ILD version) Displays energy rate, total consumption, temperature, instantaneous flow rate, accumulated flow rate, velocity, time
Suspended Solids: <2%; particle size smaller than 75µm
Response Time: < 1 second
Keypad: 4 x 4 tactile-feedback membrane keypad
Ambient temperature: -5 ~ 122°F (-20~50°C)
Fluid Velocity: 0.03 ~ ± 105 feet/sec.
Resolution: 0.003 feet/second (0.0001 m/s)
Data logger: 64 data points including flowrate, totalizer, time, & date
Digital Communication: Isolated RS 485, MODBUS, GPRS/GSM
Measurement Period: 0 to 99 s
Mounting: wall mounting, panel, local
Max. Cable Length: 500′ (150m)
Power Supply: 90 ~ 260VAC 50/60 Hz
Data storage: Up to 64 days std, 36 mos. w/ ILD version, Time and corresponding flow rates of the last 64 times power on/off events
Power Consumption: Less than 2W
Enclosure: NEMA 4X
Output Signals: 4-20 mA, Impedance 0-1kΩ, pulse, relays, Isolated OCT for alarms (on/off with buzzer)
Inputs: Two RTD channels, and additonal inputs
Sensor: IP68 – submersible

Refer here for more details: https://www.smartmeasurement.com/alsonic-eg/

 Inquiry - Ultrasonic Meter with BTU Measurement (ALSONIC-EG)