Level measurement in a stirring reactor
Reactor
Level measurement in a stirring reactor
Process data
Measuring task
Level measurement
Measuring point
Reactor
Measuring range up to
6 m
Medium
Oil/water mixture
Process temperature
0 ... +50 °C
Process pressure
0 … 0 bar
Special challenges
Differently reflecting media, tank internals, agitators
Application
In a recycling company, oil sludge, oil/water mixtures and emulsions from many industrial processes are collected and treated. The objective is to separate the oil and water for recovery, purification and reuse. This process takes place in several steps. Firstly the oil/water mixture is centrifuged, hydrogen peroxide is added and mixed in a stirring reactor, then finally it is centrifuged again. Continuous level measurement is required in the reactor stage to enable automated operation. It’s very important for there to be an absolutely reliable and accurate measurement even at low liquid levels, right down to the vessel bottom.
Your benefit
Reliable
Reliable function, even with differently reflecting media, tank internals and agitators
Cost effective
Inexpensive integration into the reactor vessel, no modifications required
User friendly
Measuring point easily accessible
Recommended products
VEGAPULS 64
Level measurement with radar in the reactor
- Precise sensor focusing enables accurate measurement despite agitators
- Measurement right down to the bottom, even with poorly reflecting media
- Contactless and maintenance-free
Measuring range - Distance
30 m
Process temperature
-196 ... 200 °C
Process pressure
-1 ... 25 bar
Inquiry - Level measurement in a stirring reactor
Fill out the form below and we'll be in touch soon.
Compare
Level measurement and point level detection in an intermediate storage tank
Environment and recycling
Compare
Level measurement in the pyrolysis chamber and in the ash discharger
Environment and recycling
