Level measurement at the belt transfer station
Share:
Belt transfer station
Level measurement at the belt transfer station
 |
|
Process data
Measuring task
Level measurement
Measuring point
Belt transfer station
Measuring range up to
3 m
Medium
Soft coal and hard coal
Process temperature
-40 … +50 °C
Process pressure
0 … 0 bar
Special challenges
Dust exposure and intense filling noise
Application
In a coal power plant, either hard coal or brown coal is burned as the main fuel source. The coal is transported on conveyor belts to the furnace. To avoid backup or overfilling at the belt transfer stations, level controls are necessary. Because only a reliable level measurement at these belt transfer stations can ensure uninterrupted feeding of the furnaces with coal. Additional point level detectors are installed to prevent overfilling.
Your benefit
Reliable
Reliable under all operating conditions
Cost effective
Maintenance-free operation in the plant
User friendly
Simple mounting and setup
Recommended Products
VEGAPULS 68
The radar sensor monitors the belt transfer station and ensures an uninterrupted feed into the coal bunker
- Non-contact, maintenance-free measurement
- High measurement certainty despite extreme dust generation
- High operational reliability ensured through noise immunity
Measuring range - Distance
75 m
Process temperature
-196 ... 450 °C
Process pressure
-1 ... 160 bar
VEGAMIP 61
Point level detection prevents backup at the transfer station
- Non-contact, maintenance-free measurement
- Very long service life and low maintenance requirements through robust design
- Dependable switching point
Measuring range - Distance
100 m
Process temperature
-40 ... 80 °C
Process pressure
-1 ... 4 bar
Inquiry - Level measurement at the belt transfer station
