Capacitive Level Switch (VEGA)
In capacitive point level detection, the sensor and vessel form the two electrodes of a capacitor. Any capacitance change caused by a level change is converted into a switching signal. Thanks to the shortenable cable and rod versions, level switches can be perfectly adapted to any application. They are often used for overfill or dry run protection as well as oil/water or foam detection.
The advantages
- The level switch can be installed in any position
- Fully insulated versions also measure aggressive liquids
- Low-cost point level detection for maintenance-free operation
Compare
VEGAPOINT 31 - Compact capacitive limit switch for light bulk solids detection
Compare
VEGAPOINT 23 - Compact capacitive limit switch with tube extension for water-based liquids detection
Compare
VEGAPOINT 21 - Compact capacitive limit switch for the detection of water-based liquids
Compare
VEGACAP 62 - LEVEL MEASUREMENT OF BULK SOLIDS | Level Measurement in Oil and All Kind Liquids
Compare
VEGACAP 63 - CORROSIVE TYPE LEVEL SWITCH| Chemical Switch Simple Set-Up and Robust
Compare
VEGACAP 64 - For adhesive liquids and light, non-abrasive bulk solids
Compare
VEGACAP 65 - SOLIDS CLINKER LEVEL SENSOR | All Switch Control Bulk Solids and Non-Conductive Liquids
Compare
VEGACAP 66 - SILO LEVEL MEASUREMENT| Low Cost and Robust Mechanical Construction
Compare
VEGACAP 67 - LEVEL SENSOR TEMPERATURE UP TO 450°C | Long Lifetime and Low Maintenance Cost
Compare
VEGACAP 69 - CONTINUOUS LEVEL SENSOR OF CORROSIVE LIQUIDS | Low Maintenance and High Resistance Material
Compare
VEGACAP 35 - CEMENTS AND CLINKER CAPACITIVE LEVEL SWITCH FOR BULK SOLIDS| Flexible and Shortage Probe
Compare
VEGACAP 27 - WATER AND OIL CAPACITIVE LEVEL SWITCH ALL LIQUIDS | Dry Run Protection
Compare