Level Switches / Point Level Switch (VEGA)
In point level detection, a point level switch detects when a certain predefined level is reached. Such a device is employed when it is not necessary to measure every possible intermediate level, as is the case with continuous level measurement. A switching command starts or stops filling equipment such as conveyors or pumps. Point level switches outputting a binary signal can be integrated into a process control system.
Point level detection systems can be used in liquids, pastes, powders or coarse bulk solids.
Typical applications for level switches are:
- minimum or maximum detection
- leak detection
- overfill protection
Compare
EL 8 | Low Price Level Detection, Easy Installation | Conductive Rod
Compare
NON-CONTACT MICROWAVE BARRIER FOR LEVEL DETECTION OF BULK SOLIDS AND LIQUIDS - VEGAMIP R61 | Easy Installation and Simple Design
Compare
HIGH SENSITIVITY RADIATION DETECTOR POINTRAC 31 | Economical Sensor Can be Used for Applications in All Industries
Compare
VEGAKON 66 | Low Cost and Easy Installation | Multi rod level switch
Compare
EL 3 | Simple Set-Up with Low Cost | Multi Control Liquid Switches
Compare
EL 4 | Exchangeable Multiple Rod Probes for All Liquids Detection
Compare
GAMMA RADIATION SOURCE LIMIT SWITCH VEGASOURCE 35 | Level and Density Measurement and Easy Installation
Compare