Level Switches / Point Level Switch (VEGA MALAYSIA/ OHMART VEGA)

In point level detection, a point level switch detects when a certain predefined level is reached. Such a device is employed when it is not necessary to measure every possible intermediate level, as is the case with continuous level measurement. A switching command starts or stops filling equipment such as conveyors or pumps. Point level switches outputting a binary signal can be integrated into a process control system.
Point level detection systems can be used in liquids, pastes, powders or coarse bulk solids.
Typical applications for level switches are:
- minimum or maximum detection
- leak detection
- overfill protection

EL 1 | Low Cost and Robust Design | Conductive Level Switch

EL 8 | Low Price Level Detection, Easy Installation | Conductive Rod

MICROWAVE BARRIER FOR LEVEL DETECTION OF BULK SOLIDS AND LIQUIDS - VEGAMIP T61 | For Silos, Bunkers and Crushers As Well As of Liquids in Tubes and Vessels

NON-CONTACT MICROWAVE BARRIER FOR LEVEL DETECTION OF BULK SOLIDS AND LIQUIDS - VEGAMIP R61 | Easy Installation and Simple Design

HIGH SENSITIVITY RADIATION DETECTOR POINTRAC 31 | Economical Sensor Can be Used for Applications in All Industries

RADIATION-BASED SENSOR FOR NON-CONTACT DENSITY MEASUREMENT OF LIQUIDS AND BULK SOLIDS - MINITRAC 31 | Compact Design Ideal for Mounting in Positions Hardly to Access and in Narrow Space Applications

VEGAKON 61 | High and Low Alarm | Water Detection Switch

VEGAKON 66 | Low Cost and Easy Installation | Multi rod level switch

EL 3 | Simple Set-Up with Low Cost | Multi Control Liquid Switches

EL 4 | Exchangeable Multiple Rod Probes for All Liquids Detection

EL 6 | Multiple Cable Probe for Pump Control

GAMMA RADIATION SOURCE LIMIT SWITCH VEGASOURCE 35 | Level and Density Measurement and Easy Installation

VEGASWING 53 - Vibrating level switch for liquids
