Level Switches / Point Level Switch (VEGA)
In point level detection, a point level switch detects when a certain predefined level is reached. Such a device is employed when it is not necessary to measure every possible intermediate level, as is the case with continuous level measurement. A switching command starts or stops filling equipment such as conveyors or pumps. Point level switches outputting a binary signal can be integrated into a process control system.
Point level detection systems can be used in liquids, pastes, powders or coarse bulk solids.
Typical applications for level switches are:
- minimum or maximum detection
- leak detection
- overfill protection
Compare
VEGASWING 51 - UNIVERSAL LEVEL SWITCH IN LIQUIDS WITH SMALL DIMENSIONS | Empty and Full Pump Protection
Compare
VEGASWING 66 - HOT OILS AND LIQUIDS LEVEL SWITCH | High Temperature Up To 450°C and High Pressure Switch
Compare
VEGAWAVE 61 - POWDERS AND FINE-GRAINED LEVEL SWITCH | Level Switch for All Adhesive and Abrasive Products
Compare
VEGAWAVE 62 - ADHESIVE AND ABRASIVE ALL POWDERS AND FINE-GRAINED | Low Cost and Easy Installation
Compare
VEGAWAVE 63 - TOP AND SIDE MOUNTING LEVEL SWITCH | Easy Installation with Universal Power Supply
Compare
VEGAPOINT 31 - Compact capacitive limit switch for light bulk solids detection
Compare
VEGAVIB 61 - FINE AND GRANULAR LEVEL SWITCH | For Flour, Sugar, Cements Level Detection
Compare
VEGAPOINT 23 - Compact capacitive limit switch with tube extension for water-based liquids detection
Compare
VEGAVIB 62 - PLASTIC FINE AND COARSE-GRAINED LEVEL CONTROL | Reliable and Low Cost
Compare
VEGAPOINT 21 - Compact capacitive limit switch for the detection of water-based liquids
Compare
VEGAVIB 63 - SOLIDS IN WATER LEVEL DETECTION| Level Switch in Minimum and Maximum Control
Compare
VEGACAP 62 - LEVEL MEASUREMENT OF BULK SOLIDS | Level Measurement in Oil and All Kind Liquids
Compare
VEGACAP 63 - CORROSIVE TYPE LEVEL SWITCH| Chemical Switch Simple Set-Up and Robust
Compare
VEGACAP 64 - For adhesive liquids and light, non-abrasive bulk solids
Compare
VEGACAP 65 - SOLIDS CLINKER LEVEL SENSOR | All Switch Control Bulk Solids and Non-Conductive Liquids
Compare
VEGACAP 66 - SILO LEVEL MEASUREMENT| Low Cost and Robust Mechanical Construction
Compare
VEGACAP 67 - LEVEL SENSOR TEMPERATURE UP TO 450°C | Long Lifetime and Low Maintenance Cost
Compare
VEGACAP 69 - CONTINUOUS LEVEL SENSOR OF CORROSIVE LIQUIDS | Low Maintenance and High Resistance Material
Compare
VEGACAP 35 - CEMENTS AND CLINKER CAPACITIVE LEVEL SWITCH FOR BULK SOLIDS| Flexible and Shortage Probe
Compare
VEGACAP 27 - WATER AND OIL CAPACITIVE LEVEL SWITCH ALL LIQUIDS | Dry Run Protection
Compare