VG Instruments (SEA) Sdn Bhd
12A, Jalan Dagang SD2/1G,
Bandar Sri Damansara,
Kepong, 52200
Kuala Lumpur, Malaysia.
+603-6276 8363
+603-6276 9363

TURBINE FLOW METER - Axial Turbine Meter

Previous 2 / 3 Next

TURBINE FLOW METER - Axial Turbine Meter Turbine Flowmeter

Turbine Flow Meter - Axial Turbine Meter


ALTM turbine flow meters (hereinafter referred to as turbines) are used for the precise measurement of instantaneous flow rates of low- viscosity fluids as tap and demineralised water, fuels, liquefied gases, light fuel oils, solvents, and pharmaceutical fluids. Turbine flowmeters measure volumetric flow, where fluid passing through the meter body is measured by the mean velocity of the flowing fluid media. Flow rectifiers ensure a laminar flow in the axial direction of the wheel. A low-mass turbine wheel carried concentrically within the meter body is rotated by the fluid. The RPM of the turbine wheel is directly proportional to the mean flow rate within the meter body and directly corresponds to the volumetric flow over a wide range.

  • High resolution and fast response time; 5 to 50 msec
  • Wide temperature range; -460 to 660 °F ( -273 to 350°C)
  • Pressures up to 9,100 psig (630 bars) or 58,000 psig (4,000 bar) using high-pressure adapters or flanges
  • Easily cleaned; designed to flush particulates through the meter with the fluid media
  • Available with dairy connections as per DIN 11851, suitable for food applications
  • Available with Tri-Clamp connections, suitable for pharmaceutcal applications
  • Sapphire bearings enable excellent low-flow performance
  • Factory calibrated, traceable to NIST

Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
Ship to Name  
Shipping Address  
*only support gif, jpeg, jpg, png, pdf

Switch to Mobile Version
available in