VG Instruments (SEA) Sdn Bhd
12A, Jalan Dagang SD2/1G,
Bandar Sri Damansara,
Kepong, 52200
Kuala Lumpur, Malaysia.
+603-6276 8363
+603-6276 9363


Previous 4 / 6 Next

GEAR POSITIVE DISPLACEMENT METER Positive Displacement Flowmeter

Gear Positive Displacement Meter


The SMC series ALGPD Gear flow meter is suitable for the precise flow measurement of various fluids of viscosities from 5 up to 25k mm²/s. Providing sufficient lubricity of the fluid, the small gear flow meters type ALGPD 01/1 and 02 as well as ball bearing versions may also be used for fluids below 5 mm²/s. Gear flow meters are positive displacement meters, similar in design to a gear pump. The measuring medium rotates two gears, which are engaged with minimum play. The medium is forced along through closed measuring chambers between gears and housing. The gears, which run idle, lose no power. The RPM of the gears is in proportion with the instantaneous flow rate and precisely detected by integral pickups through the body of the meter without contacting the fluid. The flow signal can be displayed our various other electronics. We calibrate our flow meters to match the customer's operating viscosities to determine their K factors.

  • High output frequencies resulting in good resolution and suitable for pulsating flows.
  • Reverse-flow detection and pulse multiplication functions
  • Ex-protection EExiaIICT6/T4
  • Resistance to high voltage from 50 kV up to 120 kV
  • Special meters with high-pressure connectors for service up to 690 barg (10,000 PSIG).
  • Heated versions are available on request
  • The K-factor (no. of pulses per liter) is nearly constant over a wide range.

Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
Ship to Name  
Shipping Address  
*only support gif, jpeg, jpg, png, pdf

Switch to Mobile Version
available in