Level detection of sludge and water
Share:
Sludge dewatering
Level detection of sludge and water
Application
Before drying, the residual sludge is dewatered in centrifuges or filter presses. The water generated water passes back through the treatment plant.
Recommended Products
VEGASWING 63
Point level detection in the filter water tank for pump control
- Reliable point level switching, even with changing water composition
- Adjustment-free and easy to install
- Maintenance-free operation
Process temperature
-50 ... 250 °C
Process pressure
-1 ... 64 bar
Version
Standard
Hygienic applications
with gas-tight leadthrough
with tube extension
with temperature adapter
VEGACAP 66
Full signal for detecting the filter cake during discharge
- Reliable point level detection, even with adhesive media
- Simple sensor installation and adjustment
- Maintenance and wear free operation
Process temperature
-50 ... 150 °C
Process pressure
-1 ... 40 bar
Version
PTFE insulated cable ø 8 mm with gravity weight
PTFE-insulated cable ø 8 mm with gravity weight and screening tube
VEGATOR 142
Double channel signal conditioning instrument for level detection
- Simple adjustment of the switching point through a potentiometer
- Clearly visible switching status via LED
- Simple installation through carrier rail mounting as well as detachable, coded terminals
Protection rating
IP 20
Input
2 x 4 … 20 mA sensor input
Output
2 x operating relay (SPDT)
Inquiry - Level detection of sludge and water
view more about
Water and wastewater
