Level measurement in the conditioning tank
Share:
Conditioning
Level measurement in the conditioning tank
Application
The applied chemicals and precipitants are suitably conditioned to ensure that they reach the wastewater in an optimal, low concentration. They are metered out according to the degree of pollution and mixed with the wastewater.
Recommended Products
VEGAPULS 61
Optimal control of dosage through accurate, continuous level measurement
- Operationally reliable, accurate measurement
- Highly chemically resistant unaffected by vapours
- Direct display of the actual filling
- No minimum distance (dead band)
Measuring range - Distance
35 m
Process temperature
-40 ... 80 °C
Process pressure
-1 ... 3 bar
VEGASON 61
Continuous level measurement data for permanent inventory control and optimal dosage
- Operationally reliable, maintenance-free measurement
- Reliable measurement, independent of product properties
- Direct display of overfilling
Measuring range - Distance
5 m
Process temperature
-40 ... 80 °C
Process pressure
-0.2 ... 2 bar
VEGAMET 391
Power supply for sensor, measurement data processing and display
- Simple regulation and control of level and pressure measuring instruments
- Analogue and digital outputs for connection to process control systems
- Large measured value display
Protection rating
IP 20/IP 65
Input
1 x 4 … 20 mA/HART sensor input
with transmitter power supply
Output
1 x 0/4 … 20 mA current output
up to 6 x operating relay
1 x fail safe relay
1 x Ethernet or 1 x RS232
Inquiry - Level measurement in the conditioning tank
view more about
Water and wastewater
Compare
Level measurement and point level detection in flocculant storage tanks
Water and wastewater
