Level measurement and high level detection in the lime silo
Share:
Lime silo
Level measurement and high level detection in the lime silo
Application
In the nitrogen and phosphorus removal stage, lime is used for stabilizing the pH value. Stored in silos, it is added to the wastewater as a solid or as an aqueous suspension.
Recommended Products
VEGACAP 65
Point level detection for full signal during filling
- Point level detection for reliable high level alarm during filling
- Mechanically robust sensor version guarantees long service life
- cable length shortened for easy adaptation to vessel size
Process temperature
-50 ... 200 °C
Process pressure
-1 ... 64 bar
Version
Cable ø 6 mm with screening tube without weight
Cable ø 6 mm with screening tube and gravity weight
Cable ø 6 mm with gravity weight
Cable ø 8 mm with abrasion protection without weight
Cable ø 8 mm with abrasion protection and gravity weight
Cable ø 8 mm with gravity weight
PA cable ø 12 mm with screening tube and gravity weight
VEGAFLEX 82
Continuous level measurement in the lime silo to ensure sufficient stocks
- Independent of moisture content and product composition
- Preset measuring range ensures simple adjustment and commissioning
- Robust cable version guarantees maintenance-free Operation
Measuring range - Distance
75 m
Process temperature
-40 ... 200 °C
Process pressure
-1 ... 40 bar
VEGATOR 142
Double channel signal conditioning instrument for level detection
- Simple adjustment of the switching point through a potentiometer
- Clearly visible switching status via LED
- Simple installation through carrier rail mounting as well as detachable, coded terminals
Protection rating
IP 20
Input
2 x 4 … 20 mA sensor input
Output
2 x operating relay (SPDT)
Inquiry - Level measurement and high level detection in the lime silo
view more about
Water and wastewater
Compare
Pressure monitoring and point level detection in the drinking water pipeline
Water and wastewater
