VG Instruments (SEA) Sdn Bhd
12A, Jalan Dagang SD2/1G,
Bandar Sri Damansara,
Kepong, 52200
Kuala Lumpur, Malaysia.
+603-6276 8363
+603-6276 9363

Vega Switching

Measuring techniques for point level detection

In point level detection, a point level switch detects when a certain predefined level is reached. Such a device is employed when it is not necessary to measure every possible intermediate level, as is the case with continuous level measurement. A switching command starts or stops filling equipment such as conveyors or pumps. Point level switches outputting a binary signal can be integrated into a process control system.
Point level detection systems can be used in liquids, pastes, powders or coarse bulk solids.
 
Typical applications for level switches are:
  • minimum or maximum detection
  • leak detection
  • overfill protection
in process tanks, storage tanks, silos and pipelines.


1 - 24 of 34

ACIDIC UNIVERSAL LEVEL SWITCH FOR USE IN ALL LIQUIDS - VEGASWING 61 | Dry Run Protection or Pump Protection in Vessels and Pipeline

HOT OILS AND LIQUIDS LEVEL SWITCH VEGASWING 66 | High Temperature Up To 450ˇăC and High Pressure Switch

LEVEL LIQUIDS DETECTION VEGASWING 63 | Detection for Dry Run or Pump Protection | Chemical or Non Chemical Switch

POWDERS AND FINE-GRAINED LEVEL SWITCH - VEGAWAVE 61 | Level Switch for All Adhesive and Abrasive Products

TOP AND SIDE MOUNTING LEVEL SWITCH - VEGAWAVE 63 | Easy Installation with Universal Power Supply

FINE AND GRANULAR LEVEL SWITCH - VEGAVIB 61 | For Flour, Sugar, Cements Level Detection

SOLIDS IN WATER LEVEL DETECTION - VEGAVIB 63 | Level Switch in Minimum and Maximum Control

PLASTIC FINE AND COARSE-GRAINED LEVEL CONTROL - VEGAVIB 62 | Reliable and Low Cost

ADHESIVE AND ABRASIVE ALL POWDERS AND FINE-GRAINED VEGAWAVE 62 | Low Cost and Easy Installation

UNIVERSAL LEVEL SWITCH IN LIQUIDS WITH SMALL DIMENSIONS - VEGASWING 51 | Empty and Full Pump Protection

LEVEL MEASUREMENT OF BULK SOLIDS - VEGACAP 62 | Level Measurement in Oil and All Kind Liquids

LEVEL SENSOR TEMPERATURE UP TO 450ˇăC - VEGACAP 67 | Long Lifetime and Low Maintenance Cost

CORROSIVE TYPE LEVEL SWITCH - VEGACAP 63 | Chemical Switch Simple Set-Up and Robust

VEGACAP 64

SOLIDS CLINKER LEVEL SENSOR VEGACAP 65 | All Switch Control Bulk Solids and Non-Conductive Liquids

SILO LEVEL MEASUREMENT VEGACAP 66 | Low Cost and Robust Mechanical Construction

CEMENTS AND CLINKER CAPACITIVE LEVEL SWITCH FOR BULK SOLIDS - VEGACAP 35 | Flexible and Shortage Probe

WATER AND OIL CAPACITIVE LEVEL SWITCH ALL LIQUIDS - VEGACAP 27 | Dry Run Protection

CONTINUOUS LEVEL SENSOR OF CORROSIVE LIQUIDS - VEGACAP 69 | Low Maintenance and High Resistance Material

ECONOMICAL LEVEL SWITCH FOR ALL LIQUIDS AND SOLIDS - VEGACAP 98 | Easy Set-Up and Even with Strong Buildup

HIGH FLEXIBILITY THROUGH SHORTENABLE PROBE LEVEL SWITCH EL 1 | Low Cost and Robust Design

ROD ELECTRODE LEVEL SWITCH VEGA EL8 | Low Price Level Detection and Easy Installation

MICROWAVE BARRIER FOR LEVEL DETECTION OF BULK SOLIDS AND LIQUIDS - VEGAMIP T61 | For Silos, Bunkers and Crushers As Well As of Liquids in Tubes and Vessels

NON-CONTACT MICROWAVE BARRIER FOR LEVEL DETECTION OF BULK SOLIDS AND LIQUIDS - VEGAMIP R61 | Easy Installation and Simple Design

1 - 24 of 34

Switch to Mobile Version
available in